Preparing a Control Board

TODO: Improve this with step by step instructions and screenshots

  • Assemble a control board (see v1 hardware or v2 hardware)
  • Flash the firmware
    • See Building & Flashing for details
    • Install bossa cli or dfu-util and make sure the binaries (bossac or dfu-util) are in your path
    • Install python
    • Download and extract release package from GitHub
    • Put the board into bootloader mode
      • v1: Double press reset button quickly
      • v2: Hold boot button, press and release reset, release boot button
    • In firmware folder from release package run ./flash.py [v1/v2] Release
    • This will run the flash tool
  • Connect external sensors